Reversible Standard Board and single-colour Bullnose in the same size.
Fine Woodgrain Composite Decking
Reversible composite decking with two faces in every board.
WoodEver Fine Woodgrain is a reversible 138 x 23 x 5400mm composite deck board. Each Standard Board has two finished faces in a colour pair, so you choose the face on site, and the Bullnose comes in all six face colours.
Applications
Product planning
Useful information before a sample or quote request.
Start with these public planning details, then request the current product documents needed for the exact project. Compliance-sensitive ratings should never be inferred from general website copy.
Three colour pairs; choose the visible face on site.
Allow movement gaps and support both ends of every board join.
About 3–4mm or 5–6mm board gap. Screws are sold separately.
Why this surface
A coordinated surface for everyday outdoor spaces.
Two faces, one board
Each Standard Board carries both colours of its pair. Turn it over to change the look, or use both faces to mark out a border or zone.
Three colour pairs
Silver Maple, Mocha Ember and Heritage Charcoal. Each pair puts two different colours on the two faces of one board.
Single-colour Bullnose
The Bullnose comes in all six face colours, so the exposed edge matches the face you show.
Slimmer 23mm board
138 x 23mm in 5.4m lengths, with six hollow cores and grooves on both sides for hidden clips.
Hidden clip choice
23mm metal clips leave about a 3–4mm board gap; universal plastic clips leave about 5–6mm. Clip packs do not include screws.
Installation checks
Keep joist centres within 350mm, allow movement gaps and support both ends of each board join.
ConstructionReversible wood-plastic composite with two finished faces
Standard Board138 x 23 x 5400mm, reversible
Bullnose138 x 23 x 5400mm, single colour
Colour pairsSilver Maple, Mocha Ember, Heritage Charcoal
Bullnose coloursAged Wood Grain, Charcoal, Coffee Grain, Ember Brown, Light Grey, Maple
Hollow cores6
Hidden clips23mm metal clips or universal plastic clips
Maximum joist spacing350mm centres
Facts reviewed18 October 2026
Where to buy
In stock at Builto, Melbourne.
Builto in Hallam stocks the full Fine Woodgrain Composite Decking range for pickup and delivery. See current prices at Builto. Stock last checked 28 Oct, 6:21 pm.
Buy at Builto| Profile | Size | Stock |
|---|---|---|
| Standard Board | 138 x 23 x 5400mm | In stock |
| Bullnose | 138 x 23 x 5400mm | In stock |
Product facts reviewed 18 October 2026.
Colours & finishes
Three colour pairs, two faces on every board.
Each Standard Board carries both colours of its pair. The Bullnose is a single colour, so pick the one that matches the face you show.
Silver Maple
Light Grey / Maple
Mocha Ember
Coffee Grain / Ember Brown
Heritage Charcoal
Aged Wood Grain / Charcoal
Bullnose colours
- Aged Wood Grain
- Charcoal
- Coffee Grain
- Ember Brown
- Light Grey
- Maple
WoodEver decking ranges
Fourth Generation or Fine Woodgrain?
Both ranges come in 5.4m lengths, use hidden clips and need joists at no more than 350mm centres. Builto in Melbourne stocks both.
| Detail | Fourth Generation | Fine Woodgrain |
|---|---|---|
| Construction | Co-extruded capped board, one finished face | Reversible board, two finished faces |
| Board size | 140 x 25 x 5400mm | 138 x 23 x 5400mm |
| Colours | 8 colours | 3 colour pairs; Bullnose in 6 colours |
| Profiles | Standard Board, Bullnose, Fascia Board | Standard Board, Bullnose |
| Hidden clips | 25mm metal or universal plastic | 23mm metal or universal plastic |
| Slip test | 15°, R10 (AS 4586-2013 App. D) | Not published |
How it compares
Compare material paths before deciding.
vs. Timber
A timber-look board system without the routine oiling and refinishing cycle of coated timber. Cleaning, drainage and installation requirements still apply.
vs. Generic Composite
A coordinated architectural palette with physical samples available for comparison in the project's actual exterior light.
vs. Concrete & Pavers
A timber-look, board-based alternative for outdoor surfaces. Subframe, drainage, heat and installation suitability should be assessed for each site.
Installation
Confirm the complete system before installation.
This is an ordering checklist, not an installation guide. Match boards, trims and fixings to the current document for the exact product before work starts.
1
Confirm the exact profile, board direction and edge details
2
Obtain the current subframe, gap and approved-fixing requirements
3
Check colour, batch, quantities and delivery access before cutting
Care
Use current care information.
Wash with water and mild soap for routine cleaning
Remove loose debris as part of routine cleaning
Keep intended drainage and ventilation paths clear
Do not use unapproved chemicals or powered cleaning equipment
Decision guide
Is composite decking the right fit for this project?
Use this checklist before requesting samples or a quote. It gives homeowners, builders and designers the practical context needed to compare WPC decking with timber, tiles or concrete.
Best-fit applications
WoodEver composite decking can be considered where a timber look and fewer refinishing steps are part of the project brief.
- Pool surrounds and barefoot-use zones requiring project checks
- Balconies, courtyards and alfresco areas
- Family decks where surface feel and routine coating are concerns
Details to confirm before ordering
A useful quote needs more than total square metres. Board direction, trims, stairs, wastage and access all affect the final material list.
- Finished deck area and board direction
- Subframe type, drainage fall and ventilation
- Edge trim, fascia and starter clip requirements
Maintenance expectation
WPC decking is low-maintenance, not no-maintenance. Use water and mild soap for routine cleaning, remove loose debris and keep drainage paths clear.
- No routine sanding, oiling or painting
- Avoid unapproved chemicals or powered cleaning equipment
- View physical samples in sun and shade
Project planning
Go deeper before you choose boards.
These guides answer the common project questions that sit between a product page and a quote request.
Ready to see it in person?
Request current sample options and compare available finishes in your own light before committing.
Request SamplesNeed a quantity estimate?
Use the deck calculator for a conservative board estimate before final layout and quote review.
Deck CalculatorFAQ
Decision-focused answers before you specify.
Quick guidance on samples, quoting, buying paths and project support.
Three colour pairs: Silver Maple (Light Grey / Maple); Mocha Ember (Coffee Grain / Ember Brown); Heritage Charcoal (Aged Wood Grain / Charcoal). The Bullnose comes in a single colour: Light Grey, Maple, Coffee Grain, Ember Brown, Aged Wood Grain, Charcoal.
23mm hidden metal clips (about a 3–4mm board gap) or the universal plastic clips (about 5–6mm). Use 23mm starter C clips on the first board. Clip packs do not include screws.
Fine Woodgrain is a reversible 138 x 23mm board with two finished faces. Fourth Generation is a co-extruded capped 140 x 25mm board with one finished face, eight colours and a Fascia Board.
Builto in Hallam, Melbourne stocks the Standard Board in all three colour pairs and the Bullnose in all six colours.