A capped wood-plastic composite system in coordinated 5.4m profiles.
Fourth Generation Composite Decking
Fourth-generation co-extruded composite decking in 8 colours.
A capped WoodEver WPC decking system made from 60% wood flour, 30% HDPE and 10% additives, with 5.4m Standard, Bullnose and Fascia profiles for outdoor deck planning.
Applications
Product planning
Useful information before a sample or quote request.
Start with these public planning details, then request the current product documents needed for the exact project. Compliance-sensitive ratings should never be inferred from general website copy.
Low-maintenance does not mean maintenance-free; routine cleaning is still required.
Allow movement gaps and support both ends of every board join.
Sample first so colour can be checked in Australian sun and shade.
Why this surface
A coordinated surface for everyday outdoor spaces.
Co-extruded capped board
A coloured outer layer with embossed grain wraps a dark-grey WPC core.
Material composition
60% wood flour, 30% HDPE and 10% additives
Outdoor performance
Designed to resist moisture, stains, scratches, UV exposure and outdoor weathering. It is low-maintenance, not maintenance-free.
8-colour decking range
Chocolate, Coffee, Dark Grey, Light Grey, Redwood, Teak, Teak 20, Walnut
Three coordinated profiles
Standard Board, Bullnose and Fascia Board are each supplied in 5.4m lengths.
Profile-specific dimensions
Standard Board and Bullnose are 140 x 25mm; Fascia Board is 140 x 11mm.
Installation checks
For the 25mm boards, keep joist centres within 350mm, allow movement gaps and support both ends of each board join.
ConstructionFourth generation, co-extruded capped wood-plastic composite
Material composition60% wood flour, 30% HDPE and 10% additives
Standard Board140 x 25 x 5400mm
Bullnose140 x 25 x 5400mm
Fascia Board140 x 11 x 5400mm
ColoursChocolate, Coffee, Dark Grey, Light Grey, Redwood, Teak, Teak 20, Walnut
Facts reviewed9 August 2026
Product fact source
Dimensions and options checked against current supply data.
Reviewed 9 August 2026 against WoodEver product information and the current confirmed stockist catalogue. Current availability remains stockist-controlled.
View current Builto optionsColours & finishes
The current 8-colour decking range.
Chocolate
Deep brown screen swatch; confirm the finish with a physical sample.
Coffee
Dark brown screen swatch; confirm the finish with a physical sample.
Dark Grey
Dark grey screen swatch; confirm the finish with a physical sample.
Light Grey
Light grey screen swatch; confirm the finish with a physical sample.
Redwood
Warm red-brown screen swatch; confirm the finish with a physical sample.
Teak
Warm mid-tone screen swatch; confirm the finish with a physical sample.
Teak 20
Light warm screen swatch; confirm the finish with a physical sample.
Walnut
Walnut-brown screen swatch; confirm the finish with a physical sample.
How it compares
Compare material paths before deciding.
vs. Timber
A timber-look board system without the routine oiling and refinishing cycle of coated timber. Cleaning, drainage and installation requirements still apply.
vs. Generic Composite
A coordinated architectural palette with physical samples available for comparison in the project's actual exterior light.
vs. Concrete & Pavers
A timber-look, board-based alternative for outdoor surfaces. Subframe, drainage, heat and installation suitability should be assessed for each site.
Installation
Confirm the complete system before installation.
This is an ordering checklist, not an installation guide. Match boards, trims and fixings to the current document for the exact product before work starts.
1
Confirm the exact profile, board direction and edge details
2
Obtain the current subframe, gap and approved-fixing requirements
3
Check colour, batch, quantities and delivery access before cutting
Care
Use current care information.
Wash with water and mild soap for routine cleaning
Remove loose debris as part of routine cleaning
Keep intended drainage and ventilation paths clear
Do not use unapproved chemicals or powered cleaning equipment
Decision guide
Is composite decking the right fit for this project?
Use this checklist before requesting samples or a quote. It gives homeowners, builders and designers the practical context needed to compare WPC decking with timber, tiles or concrete.
Best-fit applications
WoodEver composite decking can be considered where a timber look and fewer refinishing steps are part of the project brief.
- Pool surrounds and barefoot-use zones requiring project checks
- Balconies, courtyards and alfresco areas
- Family decks where surface feel and routine coating are concerns
Details to confirm before ordering
A useful quote needs more than total square metres. Board direction, trims, stairs, wastage and access all affect the final material list.
- Finished deck area and board direction
- Subframe type, drainage fall and ventilation
- Edge trim, fascia and starter clip requirements
Maintenance expectation
WPC decking is low-maintenance, not no-maintenance. Use water and mild soap for routine cleaning, remove loose debris and keep drainage paths clear.
- No routine sanding, oiling or painting
- Avoid unapproved chemicals or powered cleaning equipment
- View physical samples in sun and shade
Project planning
Go deeper before you choose boards.
These guides answer the common project questions that sit between a product page and a quote request.
Ready to see it in person?
Request current sample options and compare available finishes in your own light before committing.
Request SamplesNeed a quantity estimate?
Use the deck calculator for a conservative board estimate before final layout and quote review.
Deck CalculatorFAQ
Decision-focused answers before you specify.
Quick guidance on samples, quoting, buying paths and project support.
Yes. Request current sample options online and compare available finishes in your own light before committing.
Send your project dimensions and preferred finish through the enquiry form so the request and selected product stay together.